Alice embroidered in patch wonderland
| ID | About: | Link: |
|---|---|---|
| 1 | The basic cable you'll need is a straight-through cable. These are used to connect your switches and routers also, if you have an ISDN simulator, you'll need a straight-through cable to connect the router's BRI interface to the simulator. | Wow nudity patch |
| 2 | Cabbage patch black boots | |
| 3 | A more specialized cable type is the DTE/DCE cable. If you plan to use the serial interfaces on your routers (and you certainly should be!), you'll need some of these cables. To connect two routers directly via their serial interfaces, you must have a DTE/DCE cable. (If you have a Cisco router set up as a frame relay switch, you'll need more of these cables.) | Sleep patch |
| 4 | Protective flooring concrete patch |
CABBAGE PATCH BLACK BOOTS
If you have multiple switches, you'll want to connect these switches in order to create a trunk line and possibly an Etherchannel. To successfully create a trunk between two switches, you'll need crossover cables.
SLEEP PATCH
PROTECTIVE FLOORING CONCRETE PATCH
To connect your PC directly to the router or switch you're configuring, you'll need a rollover cable, also referred to as a rolled cable. This cable has an Rj-45 connector on one end and DB-9 connector on the other.